RDC6445GT5 Laser cutting system hardware user manualV1.1
深圳市睿达科技有限公司
42
Figure 8.5.1-7
This is the backup parameter function. If the current set parameters need to be backed up, click the blue
button on the screen, and enter the password input interface as shown in Figure 8.5.1-7:
Input the password and wait for the backup to succeed.
Use the function of “Backup Factory Parameters” to backup all the debugged
factory parameters and user parameters. Afterwards, at any time, all factory
and user parameters can be one-click restored by “Restore Factory
Parameters”.
Restore Factory Parameters
When pressing the “Restore Parameters”, the following interface will pop up:
Prompt
