RDC6445GT5 Laser cutting system hardware user manualV1.1
深圳市睿达科技有限公司
48
Factory parameter setting method is the same as the user parameter, please refer to Chapter 9 for
detailed parameter explanation.
8.9 File management
8.9.1 Memory file
In the main interface, press the “File” , the following interface pops up:
Figure 8.9.1
When entering this interface, if there is a memory file, the file name will be displayed on the list, and the
selected file will be previewed in the preview area on the right. When there are multiple files, press the
up and down keys on the left to turn pages to find the file, click on the selected file, the file will be
previewed, and the graphics will be displayed in the preview area. When you press the "Select" key, it
means that the file is about to be processed. The memory and U disk buttons in the lower left corner can
switch between the memory interface and the U disk interface, and have the functions of reading files
and reading U disk.
At the bottom of the interface, the related file operations are copy, delete, select, delete all, empty and
format.
The content of each entry at the bottom is as follows:
