RuggedCom RSG2488 User Manual Download Page 76

Page: 76 / 194

Chapter 3

Device Management

RUGGEDCOM RSG2488

User Guide

Clearing Statistics for Specific Ethernet Ports

Parameter

Description

The number of received and transmitted packets with size of 65 to 127 octets. This includes

received and transmitted packets as well as dropped and local received packets. This does

not include rejected received packets.

Pkt128to255Octets

Synopsis:

0 to 4294967295

The number of received and transmitted packets with size of 128 to 257 octets. This

includes received and transmitted packets as well as dropped and local received packets.

This does not include rejected received packets.

Pkt256to511Octets

Synopsis:

0 to 4294967295

The number of received and transmitted packets with size of 256 to 511 octets. This

includes received and transmitted packets as well as dropped and local received packets.

This does not include rejected received packets.

Pkt512to1023Octets

Synopsis:

0 to 4294967295

The number of received and transmitted packets with size of 512 to 1023 octets. This

includes received and transmitted packets as well as dropped and local received packets.

This does not include rejected received packets.

Pkt1024to1536Octets

Synopsis:

0 to 4294967295

The number of received and transmitted packets with size of 1024 to 1536 octets. This

includes received and transmitted packets as well as dropped and local received packets.

This does not include rejected received packets.

DropEvents

Synopsis:

0 to 4294967295

The number of received packets that are droped due to lack of receive buffers.

OutMulticasts

Synopsis:

0 to 18446744073709551615

The number of transmitted Multicast packets. This does not include Broadcast packets.

OutBroadcasts

Synopsis:

0 to 18446744073709551615

The number of transmitted Broadcast packets.

UndersizePkts

Synopsis:

0 to 4294967295

The number of received packets which meet all the following conditions:
• Packet data length is less than 64 octets.
• Collision Event has not been detected.
• Late Collision Event has not been detected.
• Packet has valid CRC.

Section 3.7.5

Clearing Statistics for Specific Ethernet Ports

To clear the statistics collected for one or more Ethernet ports, do the following:

1. Navigate to

Ethernet Stats > Clear Ethernet Port Statistics

. The

Clear Ethernet Port Statistics

form

appears.

Summary of Contents for RSG2488



































































































































































































Search results

Summary of Contents for RSG2488

Reviews:

Related manuals for RSG2488

Brands by name

Popular brands

RuggedCom RSG2488, User Manual

Search results

Summary of Contents for RSG2488

Reviews:

Related manuals for RSG2488

Brands by name

Popular brands