RUGGEDCOM RSG2488
User Guide
Chapter 5
Setup and Configuration
Configuring Classes of Service for Specific Ethernet Ports
151
3
2
1
Figure 101: Global CoS Parameters Form
1.
CoS Weighting Options
2.
Apply Button
3.
Reload Button
2. Configure the following parameter(s) as required:
Parameter
Description
CoS Weighting
Synopsis:
{ 8:4:2:1, Strict }
Default:
8:4:2:1
During traffic bursts, frames queued in the switch pending transmission on a port
may have different CoS priorities. This parameter specifies weighting algorithm for
transmitting different priority CoS frames.
Examples:
• 8:4:2:1 - 8 Critical, 4 High, 2 Medium and 1 Normal priority CoS frame
• Strict - lower priority CoS frames will be only transmitted after all higher priority CoS
frames have been transmitted
3. Click
Apply
.
Section 5.3.2
Configuring Classes of Service for Specific Ethernet Ports
To configure Classes of Service (CoS) for one or more Ethernet ports, do the following:
1. Navigate to
Classes of Service > Configure Port CoS Parameters
. The
Port CoS Parameters
table appears.
Figure 102: Port CoS Parameters Table
2. Select an Ethernet port. The
Port CoS Parameters
form appears.
