RuggedCom RSG2488 User Manual Download Page 73

Page: 73 / 194

RUGGEDCOM RSG2488

User Guide

Chapter 3

Device Management

Viewing Statistics for All Ethernet Ports

Parameter

Description

The port number as seen on the front plate silkscreen of the switch.

Name

Synopsis:

Any 15 characters

A descriptive name that may be used to identify the device conected on that port.

Link

Synopsis:

{ ----, ----, Down, Up }

The port's link status.

Speed

Synopsis:

{ ---, 10M, 100M, 1G, 10G }

The port's current speed.

Duplex

Synopsis:

{ ----, Half, Full }

The port's current duplex status.

Section 3.7.3

Viewing Statistics for All Ethernet Ports

To view statistics collected for all Ethernet ports, navigate to

Ethernet Stats > View Ethernet Statistics

. The

Ethernet Statistics

table appears.

Figure 23: Ethernet Statistics Table

This table displays the following information:

Parameter

Description

Port

Synopsis:

1/1 to 8/2

The port number as seen on the front plate silkscreen of the switch.

State

Synopsis:

{ ----, ----, Down, Up }

InOctets

Synopsis:

0 to 4294967295

The number of octets in received good packets (MuBroadcast) and dropped

packets.

OutOctets

Synopsis:

0 to 4294967295

The number of octets in transmitted good packets.

InPkts

Synopsis:

0 to 4294967295

The number of received good packets (MuBroadcast) and dropped packets.

OutPkts

Synopsis:

0 to 4294967295

The number of transmitted good packets.

ErrorPkts

Synopsis:

0 to 4294967295

Summary of Contents for RSG2488



































































































































































































Search results

Summary of Contents for RSG2488

Reviews:

Related manuals for RSG2488

Brands by name

Popular brands

RuggedCom RSG2488, User Manual

Search results

Summary of Contents for RSG2488

Reviews:

Related manuals for RSG2488

Brands by name

Popular brands