Chapter 5
Setup and Configuration
RUGGEDCOM RSG2488
User Guide
174
Configuring LLDP for an Ethernet Port
Parameter
Description
Tx Delay
Synopsis:
1 to 8192 s
Default:
2 s
The delay in seconds between successive LLDP frame transmissions initiated by value
or status changed. The recommended value is set by the following formula:
1 <= txDelay <= (0.25 * Tx Interval)
3. Click
Apply
.
Section 5.7.2
Configuring LLDP for an Ethernet Port
To configure LLDP for a specific Ethernet Port, do the following:
1. Navigate to
Network Discovery > Link Layer Discovery Protocol > Configure Port LLDP Parameters
. The
Port LLDP Parameters
table appears.
Figure 135: Port LLDP Parameters Table
2. Select a port. The
Port LLDP Parameters
form appears.
5
4
3
2
1
Figure 136: Port LLDP Parameters Form
1.
State Options
2.
Port Box
3.
Admin Status List
4.
Notifications Options
5.
Apply Button
6.
Reload Button
3. Configure the following parameter(s) as required:
Parameter
Description
State
Synopsis:
{ Disabled, Enabled }
Default:
Enabled
