RuggedCom RSG2488 User Manual Download

Page: 106 / 194

Chapter 4

System Administration

RUGGEDCOM RSG2488

User Guide

Customizing the Login Screen (Web Interface Only)

Parameter

Description
Default:

Location

The location can be used to indicate the physical location of the switch. It is displayed in

the login screen as another means to ensure you are dealing with the desired switch.

Contact

Synopsis:

Any 49 characters

Default:

Contact

The contact can be used to help identify the person responsible for managing the

switch. You can enter name, phone number, email, etc. It is displayed in the login screen

so that this person may be contacted should help be required.

3. Click

Apply

Section 4.2

Customizing the Login Screen (Web Interface

Only)

To display a custom welcome message, device informatio0n or any other information on the login page for the

Web Interface, add text to the

banner.txt

file stored on the device. If the

banner.txt

file is empty, only the

Username

and

Password

fields appear on the login page.

To update the

banner.txt

file, download the file from the device, modify it and then load it back onto the device.

For information about uploading and downloading files, refer to

Section 3.5, “Uploading/Downloading Files”

Section 4.3

Configuring Passwords

ROS allows for up to three user profiles to be configured locally on the device. Each profile corresponds to one of

the following access levels:
• Guest
• Operator
• Admin
The access levels provide or restrict the user's ability to change settings and execute various commands.

User Type

Rights

Guest

Operator

Admin

View Settings

Clear Logs

Reset Alarms

Clear Statistics

Change Basic Settings

Change Advanced Settings

Run Commands

Summary of Contents for RSG2488



































































































































































































Search results

Summary of Contents for RSG2488

Reviews:

Related manuals for RSG2488

Brands by name

Popular brands

RuggedCom RSG2488, User Manual

Search results

Summary of Contents for RSG2488

Reviews:

Related manuals for RSG2488

Brands by name

Popular brands