Chapter 5
Setup and Configuration
RUGGEDCOM RSG2488
User Guide
170
Adding an SNMP Group
Section 5.6.3.2
Adding an SNMP Group
To add an SNMP group, do the following:
1. Navigate to
Administration > Configure SNMP > Configure SNMP Access
. The
SNMP Access
table
appears.
1
Figure 130: SNMP Access Table
1.
InsertRecord
2. Click
InsertRecord
. The
SNMP Access
form appears.
9
7
8
6
5
4
3
2
1
Figure 131: SNMP Access Form
1.
Group Box
2.
Security Model Box
3.
Security Level Box
4.
ReadViewName Box
5.
WriteViewName Box
6.
NotifyViewName Box
7.
Apply Button
8.
Delete Button
9.
Reload Button
3. Configure the following parameter(s) as required:
Parameter
Description
Group
Synopsis:
Any 32 characters
The group name to which the security model and name belong. This name is used as an
index to the SNMPv3 VACM Access Table.
SecurityModel
Synopsis:
{ snmpV1, snmpV2c, snmpV3 }
Default:
snmpV3
In order to gain the access rights allowed by this entry, configured security model must
be in use.
SecurityLevel
Synopsis:
{ noAuthNoPriv, authNoPriv, authPriv }
Default:
noAuthNoPriv
