RUGGEDCOM RSG2488
User Guide
Chapter 3
Device Management
Adding a Switch IP Interface
73
1
Figure 34: Switch IP Interfaces Table
1.
InsertRecord
2. Click
InsertRecord
. The
Switch IP Interfaces
form appears.
8
6
7
5
4
3
2
1
Figure 35: Switch IP Interfaces Form
1.
IP Address Type Box
2.
IP Address Box
3.
Subnet Box
4.
Apply Button
5.
Delete Button
6.
Reload Button
3. Configure the following parameter(s) as required:
Parameter
Description
Type
Synopsis:
{ VLAN }
Default:
VLAN
Specifies the type of the interface for which this IP interface is created.
ID
Synopsis:
1 to 4094
Default:
1
Specifies the ID of the interface for which this IP interface is created. If the interface type
is VLAN, this represents the VLAN ID.
Mgmt
Synopsis:
{ No, Yes }
Default:
No
Specifies whether the IP interface is the device management interface.
IP Address
Synopsis:
###.###.###.### where ### ranges from 0 to 255
Default:
192.168.0.1
Specifies the IP address of this device. An IP address is a 32-bit number that is notated
by using four numbers from 0 through 255, separated by periods. Only a unicast IP
address is allowed, which ranges from 1.0.0.0 to 233.255.255.255.
Subnet
Synopsis:
###.###.###.### where ### ranges from 0 to 255
Default:
255.255.255.0
