RST FRC-F Series, Manual

Page: 126 / 140

9.581.140-6
Page:
126
14 USB module for long-term data recording
14.1 Installation of USB module
•
Switch VVVF controller off and wait for approx. 3 minutes to make sure the electronic
components of the VVVF controller are de-energized completely.
•
Connect the USB module to the basic controller according to the following illustration. Ensure
that both plug-connectors on the sides (marked by arrows in illustration) fit correctly.
•
Switch VVVF controller on again. As soon as the USB module was recognized, the
corresponding display menu will be enabled (see following section).
14.2 USB menu
14.2.1 Call / Activation
Switch to „Extended– USB-module“ menu and open it by pressing the E-
button.
Communication with the memory stick is activated using the E-button.
Now the module will be waiting until a memory stick is connected. You
can plug in a memory stick without having to switch off the unit.
First, the memory stick is read and checked for existing data records.
After reading, the main menu is displayed.
14.2.2 Menu control
Menu control is performed as usual. To select a menu item, use the
arrow buttons "
"; to confirm your selection, press the " E" -button. The
currently active menu is indicated by the " > " symbol. Press the " C " button
to quit the USB menu.
Extended
USB-module
----------------------
USB-module
Activate USB-Stick
----------------------
Wait for USB-Stick …
C=Abort
interrogate existing
parameter-files …
(Nr)
## USB-Main menu ##
>Save on USB
Load from USB
Delete in USB
## USB-Main menu ##
>Save on USB
Load from USB
Delete in USB