Royal Enfield HIMALAYAN EURO IV 2017, Service Manual

Page: 122 / 294

121
ROYAL ENFIELD HIMALAYAN EURO IV VEHICLE SERVICE MANUAL
Fastener, Size, Tool Usage, Precautions, Photos
Aggregate to Assemble/
Instructions
12.8
Swing arm
Ensure rear chain pad is
assembled on the swing
arm RH side
Locate the 2 inner races
inside the needle
bearing in the swing arm
Locate new dust seals in
the swing arm on either
sides of the inner races
on the swing arm.
Position the swing arm
correctly between the
frame and locate new
end cups on either side
of the swing arm outer
and frame inner.
Locate inner spacer
between the swing arm
eyelets in the centre.
Ensure all mounting
holes of the swing arm
spacers, swing arm,
inner spacer are aligned
and insert spindle fully
into frame from the LH
side.
Assemble spacer washer
and hex nylock nut on
the spindle RH side and
tighten to torque.
Ensure free and smooth
up and down movement
of swing arm.
NOTE:
Ensure the needle bearing
and inner races are greased
well before assembly.
S.
No.
Hex nut: M12
Spindle: M12
Socket spanner: 17mm
Torque: 70Nm(7 KgM)