Rosemount 3095FB Reference Manual Download Page 123

Page: 123 / 170

Reference Manual

00809-0100-4738, Rev DA
May 2006

4-13

Rosemount 3095FB

Figure 4-11. Integer Scaling - Entered Scale Factor and Offset Screen

Calculated Scale Factor and Offset

The

Calculated Scale Factor and Offset

option works the same way as the

Entered Scale Factor and Offset

feature, only the User Interface

automatically calculates the values for the scale and offset.

Define the maximum integer count.

Chose the rounding method (all integers must be whole number
values).

Enter in the minimum and maximum process variable limits that will
correspond to 0 and the maximum integer count.

Click

View Factors…

to show the calculated scale factor and offset

values for the entered information in steps 1 – 3. Click

to exit the

screen. Modify any of the inputs in steps 1 – 3 if desired.

Click

Set Scaling

to implement the changes.

Summary of Contents for 3095FB











































































































































































Search results

Summary of Contents for 3095FB

Reviews:

Related manuals for 3095FB

Brands by name

Popular brands

Rosemount 3095FB, Reference Manual

Search results

Summary of Contents for 3095FB

Reviews:

Related manuals for 3095FB

Brands by name

Popular brands