Rollei d23 com Instructions For Use Manual Download Page 71

Page: 71 / 155

SINGLE-FRAME PLAYBACK

The images stored on the CF card can be played back on the LCD screen one by one.

Turn the control dial to .

• You may also turn the dial with the camera

switched on.

If the camera is still turned off, switch it on.

• The ON/OFF switch is spring-loaded and will

return to its normal position.

• Shortly thereafter, your last picture will appear

on the LCD screen.

Press the or toggle to display the desired
image.

• Pressing the toggle will display the next

following image. Pressing the toggle will
display the preceding image.

• When you have reached the last image on the

card and press the toggle, the first of your
images will be displayed.

• If you press the toggle while the first of your

images is on the screen, your last picture will be
displayed.

Summary of Contents for d23 com




























































































































































Search results

Summary of Contents for d23 com

Reviews:

Rollei d23 com, Instructions For Use Manual, Page: 71 / 155

Search results

Summary of Contents for d23 com

Reviews: