Rollei d23 com Instructions For Use Manual Download Page 147

Page: 147 / 155

147

HINTS ON WORKING WITH THE CAMERA

Batteries

• Battery power drops at low temperature. When shooting in a cold environment, always

keep spare batteries ready, preferably in a warm inside pocket of your clothing.

• We recommend the use of NiMH batteries because of their stable performance. They will

recover their normal performance even after a drop due to low temperature.

• Remove the batteries if you do not plan to use the camera for a prolonged period. Leaking

battery acid might damage your camera.

• When using alkaline batteries, low power may occasionally be displayed although the

batteries still have sufficient power. Keep using the camera, the display will disappear.

• Caution! Batteries may heat up considerably in use. Proceed with care when removing or

changing batteries. Switch the camera off and allow the batteries to cool down.

Summary of Contents for d23 com




























































































































































Search results

Summary of Contents for d23 com

Reviews:

Rollei d23 com, Instructions For Use Manual, Page: 147 / 155

Search results

Summary of Contents for d23 com

Reviews: