manualshive.com logo in svg

Rollei d23 com, Instructions For Use Manual, Page: 137 / 155

Share
Download
Rollei d23 com Instructions For Use Manual Download Page 137

137

WHEN WORKING WITH THE CAMERA CONNECTED TO

A COMPUTER, NOTE THE FOLLOWING:

While the camera is connected to the computer or data are being exchanged
between camera and computer, DO NOT:

• Switch the camera off;

• Pull the USB cable;

• Turn the control dial;

• Insert or remove a CF card.

Otherwise the camera or the computer may malfunction, and the data on your CF card may
be damaged or erased.

In the case of Windows 2000 Professional, writing takes longer than is signaled on the
computer. In other words, even after the copying message has disappeared from the
computer screen, data transfer will continue. During this period, DO NOT switch the camera
off, pull the USB plug or turn the control dial to avoid malfunctions.

• When the camera is connected to a computer, automatic cutoff is set to 30 minutes,

regardless of the interval set in the SETUP menu (see page 113).

Summary of Contents for d23 com




























































































































































Reviews:

No comments