Roland VersaStudio BT-12, Operating Instructions Manual

Page: 74 / 234

72
3. Printing on T‐shirts
Removing Dust and Flattening Fibers
This process is to print on T‐shirts clearly. The optional finisher is used.
• As the A4 standard tray, A5 tray, and Sleeve & Socks Tray becomes hot when continuously
used on the optional finisher, give an interval of five minutes or longer to set them after
they are pulled out.
• Do not print on wet fabric. Doing so may result in a blurry image.
• Do not use the spray. If you wet the T‐shirt with the spray, the color of the tray may stain
the back of the T‐shirt.
• In high temperature environments, fabric might absorb moisture and stretch after
smoothed. Print immediately after loading the fabric.
• Remove dust and lint from fabric before printing because dust and lint whose color is the
same with the fabric color are hard to find, we recommend using a lint roller to remove
dust and lint from fabric before smoothing it.
1.
Remove dust and lint from the print surface of the T‐shirt.
Remove them with a lint brush for clothes or a roller.
2.
Use the finisher to flatten fibers and remove wrinkles from the T‐shirt.
• When using the finisher, you can carry out heat press processing for the T‐shirt loaded in the
A4 standard tray, A5 tray, or Sleeve & Socks Tray.