Roland VersaStudio BT-12, Operating Instructions Manual

Page: 33 / 234

31
Installing the Ink Cartridges
Installing the Ink Cartridges
• Some ink is consumed to fill the print heads when you turn on the machine for the first
time.
Therefore, the number of pages to be printed will be smaller than when normal cartridges
are used.
• When installing the ink cartridge, do not touch the inside of the machine.
• Do not turn the machine on until you have read how to do so.
• Be sure to install the unused ink cartridge that is genuine. Installing any other cartridge
could result in incomplete ink filling and malfunction.
1.
Remove the packaging from the ink cartridges.
Do not touch the ink supply ports or silicon substrates of ink cartridges.
• When removing the ink cartridge, avoid putting your hand near the place where the
ink cartridge is installed. If ink comes in contact with your hands, wash them
thoroughly with soap and water.
• When replacing ink, avoid getting ink on your skin. If ink comes into contact with your
skin, wash the affected area thoroughly with soap and water.
• When replacing ink, avoid getting ink on your clothing. If ink comes into contact with
your clothing, wash the stained area with cold water. Hot water will set the ink into
the fabric and make removing the stain impossible.
• If ink gets into contact with eyes, wash eyes immediately with running water. Consult a
doctor if necessary.
• Keep ink and ink containers out of reach of children.