Roland VersaStudio BT-12, Operating Instructions Manual

Page: 24 / 234

1. About This Product
22
Turning On/Off the Power
• When you turn the machine off, make sure you press and hold down the [Power] key. If
you unplug the Power cord from the wall outlet, ink consumption for maintenance
operations may increase.
Turning on the power
1.
Press the [Power] key.
If the machine starts warming up, the power lamp flashes and the "Waiting..." message will
be displayed.
If the machine becomes printable, the power lamp lights and the "Ready" message will be
displayed.
Turning off the power
1.
Press and hold down the [Power] key for one second.
When the machine is in shutdown mode, the "Shutting down..." message is displayed.
When the machine stops, the power lamp and the display turn off.
• To cut electricity consumption completely, press the [Power] key for one second, and check
that the power lamp is turned off. Then, unplug the power cord from the wall outlet.
• When switching off the energy saving power strip (power strip with a switch), be sure to turn
off the machine before following the above procedures.
• Energy Saver mode is available for this machine. If you do not use this machine for a
specified time after turning it on, the machine will be in Energy Saver mode automatically,
and electricity consumption of the machine will be reduced. To specify a wait period for
Energy Saver mode initiation, configure the system settings.
See page 122 "Using the
[System] Menu".
• If the machine is in Energy Saver mode, the display turns off.
•
The machine recovers from Energy Saver mode when it receives a print job, or when
any key is pressed.