Roland VersaStudio BT-12, Operating Instructions Manual

Page: 170 / 234

168
8. Maintenance
•
When removing the ink collector unit, do not touch the inside of the machine.
•
Do not use an ink collector unit that has not been used for a long time.
•
Do not touch the ink collector unit' chip contacts.
•
Take care not to drop the ink collector unit.
•
Take care not to drop the ink collector unit when putting it in the supplied plastic bag. The
bag might tear, causing ink to spill.
•
Make sure the ink collector unit is fully inserted. If it is not, ink will leak inside the machine.
1.
Take the ink collector unit out of the box.
2.
Open the right front cover.
DYX030
3.
Wait at least five seconds, and then remove the full ink collector unit from the
machine.
DSA322
1
1
2
While pulling the unit out, keep the unit level and press on the area marked "PUSH".
• When removing the ink cartridge, avoid putting your hand near the place where the ink
cartridge is installed. If ink comes in contact with your hands, wash them thoroughly with
soap and water.
• When replacing ink, avoid getting ink on your skin. If ink comes into contact with your
skin, wash the affected area thoroughly with soap and water.