Roland VersaStudio BT-12, Operating Instructions Manual

Page: 208 / 234

206
9. Troubleshooting
Message Causes Solutions
Replace Ink: ### / Press Start key
for Force Print
###: Cyan, Magenta, Yellow,
Black
The ink (cyan, magenta, yellow,
black) will soon run out.
If you continue printing, press the
[Start] key. Because the specified
print setting (garment type, print
quality, thickness) uses a large
volume of ink, it may run out
while you are printing. Prepare
the ink cartridge soon.
Right Front Cover is open / Close
Right Front Cover
The right front cover is open.
Close the right front cover.
See page 209 "
Cover Open ".
Right Int. Unit almost full
Internal unit is a service
replacement part.
For details about internal unit
replacement, contact your
authorized Roland DG
Corporation dealer.
SCXXX‐XX Power Off On / Call
Service if error reoccurs
An error has occurred.
Turn the machine off and then
on. If the message reappears,
contact your authorized Roland
DG Corporation dealer.
SC523‐00 Power Off On / Call
Service if error reoccurs
An error has occurred that the
height position sensor cannot
detect correctly.
Turn the machine off and then
on. If the message appears again,
clean the height position sensor
referring to page 174 "
Cleaning
the Height Position Sensor ". If
this problem persists, contact
your authorized Roland DG
Corporation dealer.
Set Tray The tray is not loaded. Load the tray on the tray stand.
Size Mismatch Tray to print or
Stop to reset
The tray of the specified size is
not set.
Change the print size. To
continue printing without size
mismatch, press the [Tray] key.
Temp. alert Please wait...
The machine is too hot or cold at
start‐up. Wait until "Ready" appears on
the display.
Top Cover open close it to /
restart machine / Power Off On
The top cover is open.
Close the top cover.
See page 209 "
Cover Open ".
Used Ink Collect Unit is set /
Replace Ink Collector Unit A used ink collector unit was
installed.
Install a new ink collector unit.
See page 167 "
Replacing an Ink
Collector Unit ".
Used Ink Crtrdge /
Replace Ink Crtg A used ink cartridge was
installed.
Replace the ink cartridge for the
color indicated by the
or
icon.
See page 160 "
Replacing an Ink
Cartridge ".