manualshive.com logo in svg

Roland VersaEXPRESS RF-640, User Manual

Share
Download
Roland VersaEXPRESS RF-640 User Manual Download Page 91

4

Part of 

Practice

Accommodating to the Types and Condition of Media

89

Open the front cover.

Move the print-head carriage (base point 

mark) to the right edge of the media using

.

The position indicated by the arrow of the base 
point mark is set as the location of the right edge 
of the media.

After positioning, close the front cover.

Press

to enable the setting.

Description

For transparent media, the width and position cannot be automatically detected. Therefore, [SHEET TYPE] 
must be set to "CLEAR" before the width and loaded position are set manually.
When [SHEET TYPE] is set to "CLEAR," printing does not stop if the media runs out while printing is in progress. 
If media runs out while printing is in progress, immediately press

to quit printing. Otherwise, there is a 

chance that the platen or the like may become soiled by ink or that ink may get inside and damage the machine.

Default Setting

[SHEET TYPE]: OPAQUE
[SHEET WIDTH]: 1625 mm

BA

SE 

PO

INT

BASE POINT

If a fixed period of time passes while the setting is in process, the menu is forcefully 

terminated. 

If a fixed period of time passes while the setting is in process, the menu is forcefully terminated and 
the print-head carriage is returned to the standby position to prevent them from drying out. In that 
case, perform the step 

4.

 again.

To cancel ongoing setting for the location of right edge of media

Close the front cover.

Press

to display the screen on the left.

Press

.

The print-head carriage returns to the standby position (inside the cover R).

SHEET  POS

CANCEL

Base point 

mark

Summary of Contents for VersaEXPRESS RF-640





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands