6
FA
Q
Other Problems
116
The Media Heating System Doesn't Warm Up
Are the settings for the [HEATER CONFIG] menu item appropriate?
Check the heater temperature in [HEATER CONFIG].
P. 79, "Fully Utilize the Media Heating System"
Is media loaded?
The media heating system does not warm up to the preset temperature when
is dark (by default).
Load media and wait for the machine to warm up.
P. 79, "Fully Utilize the Media Heating System"
Is the temperature of the room too low?
Use the machine in an environment where the temperature is 20 to 32°C (68 to 90°F).
Cannot Cut Off the Media
Is the separating knife mounted?
If the separating knife is not mounted, you cannot cut off the media.
P. 72, "Replacing the Separating Knife"
Is the cut rail mounted?
If the cut rail is not mounted, you cannot cut off the media.
P. 72, "Replacing the Separating Knife"
Discharged Fluid Level Cannot Be Checked.
Are there ink splashes inside the drain bottle?
If the inner surface of the drain bottle has ink splashes, you may not be able to check the amount of discharged
fluid.
P. 52, "When You Cannot Check Discharged Fluid Level in Drain Bottle"
