6
FA
Q
Attractive Print Result Is Impossible
107
Is the media loaded correctly?
If the media is not loaded correctly, media feed may not be smooth, or the print result may be adversely af-
fected. Make sure the media is loaded and set up correctly.
P. 21, "Loading Media"
Is the machine installed in a level and stable location?
Never install the machine in a location where it is tilted or where it may wobble or experience vibration. Also
make sure that the print heads are not exposed to moving air. These factors may lead to dot drop-out or
reduced print quality.
Is the temperature of the room too low?
The media heating system may not warm up sufficiently when the ambient temperature is less than 20°C (68°F).
Also, even when the media heating system reaches its preset temperatures, adequate effectiveness may not
be apparent if the media is thoroughly chilled. Before printing, allow the media to come to room temperature.
Colors Are Unstable or Uneven
Are the settings for the [PRESET] menu item appropriate?
If the settings selected with the [PRESET] menu item are not suitable for the type of media, the print result
may be adversely affected. Choose settings optimized to the media you're using.
P. 76, "Fully Utilizing Preset Function"
Are the operating parameters set to appropriate values?
Depending on the settings for such menu items as [FULL WIDTH S] and [PERIODIC CL.], uneven colors may
occur. If the settings have been changed, try restoring them to their default values.
P. 91, "Speeding Up Printing for Narrow Media"
P. 93, "Preventing Soiling of the Media and Dot Drop-Out"
Was printing paused partway through?
When printing is paused, the coloring at the seam may be altered when printing resumes. Avoid pausing print-
ing. By default, printing pauses when ink remaining inside the machine runs out. Before you perform lengthy
printing, check the amount of ink remaining in the ink cartridges. Printing may also pause when data is not
sent from the computer quickly enough. We recommend not performing any other tasks with the computer
while printing is in progress.
Is the media loaded correctly?
If the media is not loaded correctly, media feed may not be smooth, or the print result may be adversely af-
fected. Make sure the media is loaded and set up correctly.
P. 21, "Loading Media"
