manualshive.com logo in svg

Roland VersaEXPRESS RF-640, User Manual

The Roland VersaEXPRESS RF-640 is a high-performance printer, designed to deliver exceptional print quality. Unlock the full potential of this versatile machine with our comprehensive product manual, available for download absolutely free. Find the user manual on manualshive.com and harness the power of your RF-640 to achieve outstanding results.

Share
Download
background image

3

Maintenance

Maintenance that Should Be Performed More Than Once a Month

59

Manual Cleaning

CAUTION 

Be sure to perform operations as specified by the instructions, and never 

touch any area not specified in the instructions.

Sudden movement of the machine may cause injury.

1.

Enter the manual-cleaning menu.

Remove any media.

Close the front cover.

Important Notes on This Procedure

 Before attempting this operation, remove any media.

 To prevent the print heads from drying out, finish this procedure in 30 minutes or less. A warning 

beep sounds after 30 minutes.

 Never use any implement other than the included cleaning stick. Cotton swabs or other lint-

producing items may damage the print heads. If you use up the cleaning stick, purchase a new 
one from your authorized Roland DG Corp. dealer or us.

 Use one cleaning stick per cleaning session, then discard the stick after use. Reusing cleaning sticks 

may reduce printing quality.

 Do not put the cleaning stick used for cleaning into the cleaning liquid. It will deteriorate the fluid.

 Never rub the nozzle surface of the print heads.

When a warning beep sounds during cleaning

A warning beep sounds in 30 minutes after the operation is started. At this time, stop work, and follow 
the procedure

 

3 

(P. 62) to attach cover L and cover R, then close the front cover. Press

to 

quit the manual-cleaning menu. After that, restart the procedure from the beginning.

Necessary items

Cleaning liquid

Cleaning stick

*In the RF-640A, the cleaning liquid is 
not packed with the machine. Regard-
ing the purchase, contact your autho-
rized Roland DG Corp. dealer or us.

Summary of Contents for VersaEXPRESS RF-640





































































































































Reviews:

No comments

Related manuals for VersaEXPRESS RF-640

Brands by name

Popular brands

Load more brands