manualshive.com logo in svg

Roland VersaEXPRESS RF-640, User Manual

Share
Download
Roland VersaEXPRESS RF-640 User Manual Download Page 24

2

Basic 

Operation

Loading Media

22

 Fit the paper tube (core) onto the end cap of the media holder [Left].

Do not secure the media holder now.

 Move the media holder [Right] and fit the end cap onto the paper tube (core) of the 

media.

Fit it securely to prevent the media from easy loose.

Media holder 

[Left]

Media holder 

[Right]

End cap

Install conforming to the procedures.

Load the media while the left media holder is positioned close to the left edge, as shown in the fig-
ure. Also, never secure the media holder in place before loading the media. Loading media without 
performing these steps in the proper order may make smooth media feed impossible or adversely 
affect print results.

How to use the media flanges for the paper tube inner diameter 2 inches
* The media flanges for the paper tube inner diameter 2 inches are optional items.

Media flanges for 

paper tube inner 

diameter 2 inches

Insert the clip.

Line up the ridges 

and grooves

Pull out the clip.

If it is difficult to pull 

out, use a pair of pliers 

or other such tool.

End cap

Summary of Contents for VersaEXPRESS RF-640





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands