2
Basic
Operation
Setup of Media
37
6.
Setting the drying method and time after printing
Press
to select the setting.
Press
to enable the setting.
For the individual setting method of this setting item and the description, refer to
P. 82, "Drying the Trail-
ing Edge of the Printing Area on the Dryer".
Press
to set the drying time.
Press
to enable the setting.
For the individual setting method of this setting item and the description, refer to
P. 82, "Setting the
Drying Time After Printing".
FEED FOR DRY
DISABLE
ENABLE
Current
setting
Setting after
changed
Drying Method after Printing
After the 1st page is printed, set that the media should be fed until the trailing edge of the printed
area is positioned directly on the dryer. To make sure to dry the entire printed area, select [ENABLE]. If
[DISABLE] is selected, the trailing edge of the printing area is not fed to the dryer unless you continue
with a subsequent printing operation.
DRYING TIME
10min 10min
Current
setting
Setting after
changed
Example of setting time (general guide):
* The setting time varies according to the type of media and the
setting of printing quality.
Condition: Non-coated vinyl media
Setting time: About three minutes
Drying Time after Printing
Set the drying time after the 1st page is printed. The next operation is not started until the set time
passes.
