3-19
13
CARRIAGE TOP COVER
Fix the CARRIAGE TOP COVER.
14
Fix the TOOL CARRIAGE COVER.
CARRIAGE COVER
Enter the SERVICE MODE and perform the following
adjustments and settings.
1. PINCH ROLLER POSITION SENSOR CHECK
2. LIMIT POSITION & CUT DOWN POSITION INITIALIZE
3. TOOL HEIGHT ADJUSTMENT
4. TOOL PRESSURE ADJUSTMENT
5. CROP MARK SENSOR ADJUSTMENT
6. TOOL / CROP MARK SENSOR POSITION ADJUSTMENT
7. PRINT / CUT POSITION ADJUSTMENT
8. CUTTING QUALITY CHECK
15
Fix the FRONT RAIL COVER, FRONT COVER and I/S
COVER.
FRONT RAIL COVER
FRONT COVER
I/S COVER
16
Summary of Contents for VersaCamm SP-540V
