To Ensure Safe Work
About
and
Notices.
Used for instructions intended to alert the operator to the risk of death
or severe injury should the unit be used improperly.
Used for instructions intended to alert the operator to the risk of injury
or material damage should the unit be used improperly.
* material damage refers to damage or other adverse effects caused
with respect to the home and all its furnishings, as well to domestic
animals or pets.
About the Symbols
The
symbol alerts the user to items that must never be carried out (are
forbidden). The specifi c thing that must not be done is indicated by the design
contained within the circle.
The symbol at left means not to touch.
The
symbol alerts the user to things that must be carried out. The specifi c
thing that must be done is indicated by the design contained within the circle. The
symbol at left means the power-cord plug must be unplugged from the outlet.
The
symbol alerts the user to important instructions or warnings. The specifi c
meaning of the symbol is determined by the design contained within the triangle.
The symbol at left means “danger of electrocution”.
In addition to the
and
symbols, the symbols shown below are also used.
: Tips and advise before the adjustment.
Summary of Contents for VersaCamm SP-540V
