94
Try Out the Sounds
To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and
turn off the power on all devices before making any connections.
fig.12-03e(ConnectionImage)
1.
Before hooking anything up, make sure that the power on all of
your gear is turned OFF.
2.
Connect the VariOS to your amp/speaker system.
3.
After correctly inserting the VC-1 into the PC card slot in the
VariOS’s front panel, switch ON the POWER switch.
*
Carefully insert the PC card all the way in – -until it is firmly in place.
*
This unit is equipped with a protection circuit. A brief interval (a few
seconds) after power up is required before the unit will operate normally.
*
Always make sure to have the volume level turned down before switching
on power. Even with the volume all the way down, you may still hear
some sound when the power is switched on, but this is normal, and does
not indicate a malfunction.
*
Never insert or pull out while the VC-1 (VariOS) is turned on.
4.
Turn on the power for any connected amplifiers or speakers.
5.
Wait for the VC-1 to start up. When it has started up normally, a screen like the following will appear. The
display shows the selected Patch.
fig.12-04e(Card&LCD_default)
Turning On the Power
Monitor Speaker
MIDI Keyboard
MIDI IN
MIDI OUT
Patch Number
Cursor
Patch Name
vc1_e.book 94 ページ ２００４年４月２日 金曜日 午後３時２１分
Summary of Contents for V-Card VC-1
Page 154: ...154 Index vc1_e book 154...
