Roland V-Card VC-1, Owner'S Manual

Page: 62 / 156

62
Tone Parameters
fig.09-18e(EQ_Hf/HQ)
HiFreq (High Frequency)
Sets the frequency where the gain is altered in the middle to high
range.
Value: 250, 300, 350, 420, 500, 600, 700, 840 Hz, 1.0, 1.2,\r1.4, 1.7,
2.0, 2.4, 2.8, 3.4, 4.0, 4.8, 5.7, 6.7, 8.0, 9.5 kHz
HiQ (High Q)
Sets the width of the frequency band where the gain is boosted or
cut. With a higher value, the frequency band is narrower, and vice
versa.
Value: 0.3, 0.5, 0.7, 1.5, 2.0, 3.0, 4.2, 6.0
fig.09-19e(EQ_Hg)
HiGain (High Gain)
Sets the gain of the Hf frequency. “ + ” settings raise the gain and “ -
” settings lower it.
Value: -12–+12 dB
fig.09-20(LCD_ChorusEdit)
Chorus Edit
Type (Chorus Type)
Selects one of the 8 basic chorus effects.
Value:
1–8
Rate (Chorus Rate)
Sets the rate of the chorus effect. Higher values quicken the rate.
Value: 0–100
Depth (Chorus Depth)
Sets the depth of the chorus effect. Higher values deepen the effect.
Value:
0–100
Display Type
1 Chorus 1
2 Chorus 2
3 Flanger 1
4
Flanger 2
5 Feedback Chorus
6 Tremolo
7 Chorus Tremolo
8
Dimension
Frequency
HiFreq
Level 0
HQ is Height.
HQ is low.
Frequency
HiFreq
Level 0
HiGain
vc1_e.book 62 ページ ２００４年４月２日 金曜日 午後３時２１分