Roland V-Card VC-1, Owner'S Manual

Page: 120 / 156

120
Settings for the Entire VC-1
Changes you make to the System function settings are only temporary – they will be discarded as soon as
the power is turned off. If you want to keep any changes you’ve made in the system settings, you must
save them in the VC-1. (System Save)
fig.12-33a
1.
Press the [MENU] button so it’s lighted, and access the MENU
screen.
2.
Turn the [VALUE] knob to select “ System ,” and press the
[VALUE] knob.
fig.12-47
3.
Turn the [VALUE] knob to select “ System Save ,” and press the
[VALUE] knob.
fig.12-47a
4.
The display will ask “Are You Sure?” Press [VALUE] knob once
again to carry out the system save operation.
The current settings of the system functions can be restored to a set of standard settings, or to the factory
settings. (System Initialize)
fig.12-33a
1.
Press the [MENU] button so it’s lighted, and access the MENU
screen.
2.
Turn the [VALUE] knob to select “ System ,” and press the
[VALUE] knob.
fig.12-48
3.
Turn the [VALUE] knob to select “ SystemInitialize ,” and press
the [VALUE] knob.
fig.12-48a
4.
The display will ask “Are You Sure?” Press [VALUE] knob once
again to carry out the system initialize operation.
5.
If you want the factory settings to be in effect the next time the
VC-1 (VariOS) is powered up, you must save system.
Saving the System Settings
Initializing the System Settings (Init)
vc1_e.book 120 ページ ２００４年４月２日 金曜日 午後３時２１分