73
Tone Parameters
TVA
fig.09-40(LCD_TvaTva)
Level
Sets the volume of a Partial. Higher values may cause sound
distortion. If so, lower the value. Even when the Level is set to
zero here, the sound may not be completely muted if the TVA
ENV curve is high.
Value:
0–100
Velo (Velocity Range)
Sets the sensitivity of the velocity that controls the volume of the
sound. “
-
” values lower the level by harder playing, and “
+
”
values raise the level by harder playing.
Value:
-50–+50
BP (Bias Point)
You can change the overall volume of the keyboard (= bias level) from the set level, and set the range (bias
direction) where the bias level is valid.
This bias range is where the bias level is valid on the keyboard. It can be set with the bias point (Where he
bias range begins) and bias direction ( < or > ).
Value:
<A1–<C7, >A1–>C7
BLevel (Bias Level)
The curve ( bias level ) can be set. Lower values make the curve steeper.
Value:
-12–0
TVA (Time Variant Amplifier)
Display Example
Function Example
>C4
The bias level is only valid on the keyboard above the C4 key.
<C4
The bias level is only valid on the keyboard below the C4 key.
Volume Adjustment
fig.09-41e(bias/direction)
•
Bias Point:
>C6
0
Angle
C6
Value
vc1_e.book 73 ページ ２００４年４月２日 金曜日 午後３時２１分
Summary of Contents for V-Card VC-1
Page 154: ...154 Index vc1_e book 154...
