manualshive.com logo in svg

Roland V-Card VC-1, Owner'S Manual

Share
Download
Roland V-Card VC-1 Owner'S Manual Download Page 124

 

124

 

Connecting to Your Computer via USB

 

In order to use the VC-1 as a USB MIDI device from your computer, you must first install the USB MIDI 
driver. The USB MIDI driver is on the “VariOS Driver CD-ROM.” (

 

NOT

 

 VC-1 CD-ROM!)

The correct driver and the installation procedure will depend on your system and on the other programs 
you are using. Be sure to read the VariOS User Guide before installation.

 

*

The most recent version of the USB-MIDI driver can be downloaded from the Roland Website;

 

http://www.roland.com/products/en/VC-1/

 

. This URL may change without notice. 

 

Exchanging MIDI Messages with Your Computer

What is the USB MIDI Driver?

fig.11-12e(MidiDriver)

The USB MIDI Driver is a software which 
passes data between the VC-1 and the 
application (sequencer software, UniQuest 
editor, etc.) that is running on the USB-
connected computer.
The USB MIDI Driver sends data from the 
application to the VC-1, and passes data 
from the VC-1 to the application.

Application

USB

Driver

Computer

USB connector

USB cable

USB connector

VariOS

vc1_e.book 124 ページ ２００４年４月２日　金曜日　午後３時２１分

Summary of Contents for V-Card VC-1





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands