Editing Sounds and Other Settings for Kits (Kit Edit)
20
Setting the Kit Level
(Kit Level)
Sets the volume of the kit.
1 .
On the KIT EDIT screen, select
“Kit Level”
and then
press
“SELECT”
(F2 button)
.
The KIT LEVEL screen appears.
2 .
Use the
[+]
[–]
buttons to edit the value .
Parameter
Value
[+] [-] buttons
Explanation
Level
-INF,
-60.0–+6.0
[dB]
(in
units of 0.5)
Here’s how to set the volume of the kit.
3 .
Press the F1 button several times to return to the top
screen .
Mute Group
(Mute Group)
Mute group settings let you specify that when you strike a pad, other
pads in the same mute group are muted (silenced).
This is useful for sounds that sustain such as gongs or chappa (hand
cymbals), so that you can mute their sound when hitting another pad
and so forth.
1 .
On the KIT EDIT screen, select
“Mute Group”
and then
press
“SELECT”
(F2 button)
.
The MUTE GROUP screen appears.
2 .
Use the
[
H
]
[
I
]
buttons to select the item, and then
use the
[+]
[-]
buttons to change the setting .
Parameter
[
H
] [
I
] buttons
Value
[+] [-] buttons
Explanation
PAD1H Send
OFF,
GRP 1–4
These parameters specify the mute group
number.
When you strike the pad of the number
specified in Send, the sound of the pad
assigned to the same number in Receive
is muted.
* The pad is not be muted if you specify the
same number in MUTE Send and MUTE
Receive for the same location (e.g., head or
rim) of the same pad.
PAD1H Receive
PAD1R Send
PAD1R Receive
PAD2H Send
PAD2H Receive
PAD2R Send
PAD2R Receive
3 .
Press the F1 button several times to return to the top
screen .
Setting How the Nuance Changes According to
Where You Strike the Pad
(Kit Pad Control)
1 .
On the KIT EDIT screen, select
“Kit Pad Control”
and
then press
“SELECT”
(F2 button)
.
The KIT PAD CONTROL screen appears.
2 .
Use the
[
H
]
[
I
]
buttons to select the item, and then
use the
[+]
[-]
buttons to change the setting .
Parameter
[
H
] [
I
] buttons
Value
[+] [-] buttons
Explanation
PAD1 Rim Detect
OFF, ON
Sets whether the rim is detected.
PAD2 Rim Detect
PAD1 Pos Detect
OFF, ON
Sets whether to change the sound (ON) or
not (OFF) according to where you strike the
pad (head).
PAD2 Pos Detect
PAD1 Pos Area
-5–+5
Sets the strike point area for the head.
Higher positive values widen the striking
area further outwards from the center.
PAD2 Pos Area
3 .
Press the F1 button several times to return to the top
screen .
Summary of Contents for TAIKO-1
Page 1: ...2021 Roland Corporation 01...