Roland LV-290, User Manual

Page: 167 / 216

165
16) Click “Execute” of Output window to process job.
17) If there is an error with the placement, SmartCONTROL TM Vision may not find the marks correctly.
"Pattern Match Failure" message will pop up, press "OK "button to continue.
18) Move the carriage with red beam to the failed mark.
19) Click “Execute” again, SmartCONTROL
TM
Vision will automatically calibrate the position and continue the
job.
NOTE
If the object placement angle is too large, SmartCONTROLTM Vision may not source the marks.
Repeat Step 17 ~ Step 19 operation.