manualshive.com logo in svg

Roland LV-290, User Manual

The Roland LV-290 is a high-performance digital piano that delivers exceptional sound quality and a realistic playing experience. To get the most out of your instrument, be sure to download the free User Manual from manualshive.com to access detailed instructions on its features and functionality.

Share
Download
background image

 

                                          129 

 

                               

 

5.2.3.6 LV-290 Printer Driver >> Raster Page 

 

NOTE 

The Raster Page is only available when Black & White Mode Setting is selected from the Options 
Page, this page offers a number of advanced Raster Engraving output options.

 

 

 

 

Contrast (Raster Page) [DEFAULT SETTING: 0] 

This provides a quick and easy way to immediately adjust the contrast of an engraved image. Moving the 

slider to the Dark setting will increase the contrast levels of the engraved output, whereas moving the slider 

to the Light setting will decrease the contrast levels of the engraved output. 

 

Tip 

There are other ways to adjust an engraved image’s contrast such as: adjust the power / speed 
settings or simply adjust the contrast of the image in software with the graphic software application.

 

 

 

Summary of Contents for LV-290

























































































































































































































Reviews:

No comments

Related manuals for LV-290

Brands by name

Popular brands

Load more brands