Roland IU-1000F Operating Instructions Manual Download Page 129

Page: 129 / 144

If the Machine Is to be Left Unused for a Long Time or If a Power Outage Is Scheduled

127

If the Machine Is to be Left Unused for a Long

Time or If a Power Outage Is Scheduled

The solution depends on how long the machine is to be left unused or the duration of the scheduled power

outage.

•

If the machine is to be left unused for 10 days or longer
Discharge the ink regardless of the duration of the power outage. For details, see page 127

"Discharging Ink".

Discharging Ink

If leaving the machine idle for a long period (10 days or more), discharge the ink before stopping the

machine.
Before using the machine after discharging the ink, it is necessary to fill the tanks with ink. Contact your

authorized Roland DG Corporation representative to fill the tanks with ink.

•

Be sure to wear gloves and goggles during the work. Otherwise, ink may drip or be scattered.

•

Do not place any object on the table as the carriage moves there.

Slide the cover of the left-side ink receiver section carefully into the printer until it stops.

Summary of Contents for IU-1000F

















































































































































Search results

Summary of Contents for IU-1000F

Reviews:

Related manuals for IU-1000F

Brands by name

Popular brands

Roland IU-1000F, Operating Instructions Manual

Search results

Summary of Contents for IU-1000F

Reviews:

Related manuals for IU-1000F

Brands by name

Popular brands