Roland IU-1000F Operating Instructions Manual Download

Page: 111 / 144

If a Message Appears

109

Message

Cause

Solution

61: "Carriage cannot go to

original position."

"Contact your equipment

provider, please!"

There is a problem with the

carriage system of the machine.

Turn the power to the machine

off and then on again. If the same

message still appears, contact

your authorized Roland DG

Corporation representative.

79: "Failed to add printing task."

"1.File is using by other process.

2.File format is incorrect."

•

The specified RIP file is in

use.

•

The specified RIP file uses a

format that is not

supported by the machine.

•

Wait a while before

attempting printing again.

•

Convert the file to the

correct format.

80: "Designated RIP driver

solution has failed."

You are specifying a RIP driver

that is not supported by the

machine.

Restore the settings file. If the

same message still appears,

reinstall Print Control, and then

restore the settings file. For

details about how to restore the

settings file, see page 80 "Backing

Up/Restoring the Settings".

88: "USB cable is not connected." There is a problem with the USB

connection between the machine

and the computer.

Check that the machine is

securely connected with the

included USB cable. If the USB

cable is damaged or there is a

problem with the USB connection

of the machine, contact your

authorized Roland DG

Corporation representative.

99: "USB cable is not connected." There is a problem with the USB

connection between the machine

and the computer.

Check that the machine is

securely connected with the

included USB cable. If the USB

cable is damaged or there is a

problem with the USB connection

of the machine, contact your

authorized Roland DG

Corporation representative.

Summary of Contents for IU-1000F

















































































































































Search results

Summary of Contents for IU-1000F

Reviews:

Related manuals for IU-1000F

Brands by name

Popular brands

Roland IU-1000F, Operating Instructions Manual

Search results

Summary of Contents for IU-1000F

Reviews:

Related manuals for IU-1000F

Brands by name

Popular brands