Roland IU-1000F, Operating Instructions Manual

Page: 49 / 144

Test Printing
47
7. Click [ ] to raise the carriage to a height where the print heads do not interfere with the
media.
8. Enter numerical values in [X:] and [Y:] for "Medium Position" in accordance with the
position to measure media thickness.
When printing on uneven media, measure its thickest part.
Align the LED marker light with the part to be measured.
1. LED marker light
9. Click [Move to Destination].
10. Click [OK].
The machine measures the media thickness and the carriage moves to the set height.
11. Confirm the setting contents and click [Confirm].
12. Click [Print].
After the carriage has moved toward the recess by approximately 160 mm, the test pattern is printed.