Roland IU-1000F Operating Instructions Manual Download Page 103

Page: 103 / 144

If You Cannot Print as Expected

101

Enter the optimum adjustment value in [High] for [Bi-Direction Offset], and then click

[Apply].

Print the test pattern and check the adjustment pattern for Cyan.

Look at the return pass line with "0" on it. Check whether or not the outbound pass lines and the

return pass lines are overlapped and aligned to form one straight line. If a straight line is not formed,

perform adjustments until they become overlapped and aligned to form one straight line.

Check the adjustment patterns for Magenta, Yellow, and Black.

•

Look at the return pass line with "0" on it. Check whether or not the outbound pass lines and the

return pass lines are overlapped and aligned to form a straight line.

•

If a straight line is not formed, perform "Color Offset Adjustment" again because the ink drop

position is misaligned for the color nozzles. After this, perform page 99 "Adjustment for

Misalignment in Bidirectional Printing" again.

Summary of Contents for IU-1000F

















































































































































Search results

Summary of Contents for IU-1000F

Reviews:

Related manuals for IU-1000F

Brands by name

Popular brands

Roland IU-1000F, Operating Instructions Manual

Search results

Summary of Contents for IU-1000F

Reviews:

Related manuals for IU-1000F

Brands by name

Popular brands