Roland IU-1000F Operating Instructions Manual Download

Page: 41 / 144

How to Use the Print Control Screen

10.

Print Information

You can check information such as the RIP file information. You can also print this information on the

footnote. For information on printing the information on the footnote, see page 76 "Printing a

Footnote".

11.

Preview screen

You can preview an image of a RIP file.

[Maintenance] Screen

You can configure the carriage motion settings, change the carriage position, and check the system

information of the machine.

Calibration

Calibrates the status of the nozzle for printing.

[Color Offset]

Adjusts the ink drop position which is misaligned among the color nozzles in the Y direction. For details,

see page 92 "Color Offset Adjustment".

[Bi-Dir Offset]

This machine can print in bidirectional mode, and the print heads perform printing for the outbound

pass and return pass. For details, see page 99 "Adjustment for Misalignment in Bidirectional Printing".

Do not configure other settings because they have already been set to their optimum values.

Summary of Contents for IU-1000F

















































































































































Search results

Summary of Contents for IU-1000F

Reviews:

Related manuals for IU-1000F

Brands by name

Popular brands

Roland IU-1000F, Operating Instructions Manual

Search results

Summary of Contents for IU-1000F

Reviews:

Related manuals for IU-1000F

Brands by name

Popular brands