Roland IU-1000F Operating Instructions Manual Download

Page: 43 / 144

How to Use the Print Control Screen

Carriage Lifter

You can measure the thickness of the media and move the carriage to the height set in the setting items.

Setting & Status

Specify the media thickness and the distance between the media and print heads.

[Detect Medium Height]

Detects the thickness of the media automatically and moves the carriage to a height added the value

specified in Printhead to Medium Height(d).

[Apply]

Click to apply the settings.

[Move To Print Height]

Raises the carriage to a height added the values specified in Medium Thickness(T) and Printhead to

Medium Height(d).

Carriage position screen

Indicates the locations of the carriage, table, and media.

[Lifter Back Zero]

Reset the height of the carriage to return the carriage to zero.

Up arrow button/Down arrow button

Move the carriage to the upper or lower position. The down arrow button can be used when the media

thickness sensor comes out.

Summary of Contents for IU-1000F

















































































































































Search results

Summary of Contents for IU-1000F

Reviews:

Related manuals for IU-1000F

Brands by name

Popular brands

Roland IU-1000F, Operating Instructions Manual

Search results

Summary of Contents for IU-1000F

Reviews:

Related manuals for IU-1000F

Brands by name

Popular brands