manualshive.com logo in svg

Roland Groovebox MC-707, Reference Manual

Share
Download
Roland Groovebox MC-707 Reference Manual Download Page 50

50

Here’s how to specify a clip’s length and playback method.

Tone Tracks or Drum Tracks

Making sequencer settings

1 . 

Hold down the

 [SHIFT] button

 and press the

 [MEASURE] 

button

 .

The CLIP SEQ SETTING screen appears.

2 . 

Use the

 [C1]

–

[C4] knobs

 to make settings .

Parameter

Value

Explanation

STEP LEN

1–128

Specifies the length of the clip.

SCALE

1/8,
1/16,
1/32,
1/4T,
1/8T,
1/16T,

Specifies the step resolution.

1/8:

 eighth notes

1/16:

 sixteenth notes

1/32:

 thirty-second notes

1/4T:

 quarter note triplets

1/8T:

 eighth note triplets

1/16T:

 sixteenth note triplets

DIRECTION

FWD,
REV,
FWD+REV,
INV,
RND

Specifies how the sequence plays.

FWD:

 Play forward from the first step.

REV:

 Play backward from the last step.

FWD+REV:

 Play forward from the first 

step, and after reaching the last step, play 
backward.

INV:

 Play even numbers and odd numbers 

inverted.

RND:

 Play randomly.

SHUFFLE

-50–+50

Adjusts the strength of shuffle (bounce) for 
the playback timing.
This can be set individually for each clip.

Editing the settings of a

 clip

1 . 

Hold down the

 [SHIFT] button

 and press the

 [CLIP] button

 .

The clip setting screen appears.

2 . 

Use the 

cursor [ ] [ ] buttons

 to select a parameter, and use 

the

 [C4] knob

 to edit the value .

Parameter

Value

Explanation

Shuffle

-50–+50

Adjusts the strength of shuffle (bounce) for 
the playback timing.
This can be set individually for each clip.

Transpose

-12–+12

Shifts the playback transposition (Tone 
only).

Bend Mute

OFF, MUTE

Disables bend (Tone only).

Step Length

1–128

Specifies the length of the clip.

Parameter

Value

Explanation

Scale

1/8,
1/16,
1/32,
1/4T,
1/8T,
1/16T,

Specifies the step resolution.

1/8:

 eighth notes

1/16:

 sixteenth notes

1/32:

 thirty-second notes

1/4T:

 quarter note triplets

1/8T:

 eighth note triplets

1/16T:

 sixteenth notes triplets

Direction

FWD,
REV,
FWD+REV,
INV,
RND

Specifies how the sequence plays.

FWD:

 Play forward from the first step.

REV:

 Play backward from the last step.

FWD+REV:

 Play forward from the first 

step, and after reaching the last step, play 
backward.

INV:

 Play even numbers and odd numbers 

inverted.

RND:

 Play randomly.

LOOPER

Specifying the playback m

ethod

1 . 

Hold down the

 [SHIFT] button

 and press the

 [MEASURE] 

button

 .

The CLIP SEQ SETTING screen appears.

Parameter

Value

Explanation

STEP LEN

1–128

Specifies the length of the clip.

*  The same setting can also be made in the CLIP 

settings screen ([SHIFT] + [CLIP]).

REVERSE

OFF, ON

Specifies the sample playback method.

*  The same setting can also be made in the CLIP 

settings screen ([SHIFT] + [CLIP]).

Editing the settings of a

 clip

1 . 

Hold down the

 [SHIFT] button

 and press the

 [CLIP] button

 .

The LOOPER CLIP SETTING screen appears.

2 . 

Use the 

cursor [ ] [ ] buttons

 to select a parameter, and use 

the

 [C4] knob

 to edit the value .

Parameter

Value

Explanation

Step Length

1–128

Specifies the length of the clip.

*  The same setting can also be made in 

the MEASURE setting screen ([SHIFT] + 

[MEASURE]).

Reverse

OFF, ON

Specifies the sample playback method.

*  The same setting can also be made in 

the MEASURE setting screen ([SHIFT] + 

[MEASURE]).

Editing a Clip’s Settings

Summary of Contents for Groovebox MC-707


























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands