Roland Groovebox MC-707 Reference Manual Download

Page: 46 / 121

Editing the DRUM Track

Pad Settings

(PAD MENU)

Here you can assign an instrument to each pad.
In PAD MENU you can change the instrument, and load or edit samples.

1 .

Hold down the

[SHIFT] button

and press the

[SOUND]

button

The KIT EDIT screen appears.

2 .

Use the cursor buttons to select the pad that you want to
edit, and then press the

[ENTER] button

The DRUM INST MENU screen appears.

Changing the Pad’s Sound (Instrument)

(INST SELECT)

1 .

Use the cursor buttons to select "INST SELECT," and then
press the

[ENTER] button

The DRUM INSTRUMENT browser appears.

In the DRUM INSTRUMENT browser, instruments or sample files can
be loaded into a kit.

PRESET:

Load an instrument or kit from the MC-707’s presets

PROJECT:

Load an instrument from a project saved on the SD card

WAVE FILE:

Load a sample file from the SD card

Editing an Instrument

(INST EDIT)

Here’s how to edit the instrument that’s loaded into the pad.

1 .

Use the cursor buttons to select

“INST EDIT,”

and then press

the

[ENTER] button

The DRUM INST SETTING screen appears.

Select the category of parameter that you want to edit.
Use the cursor buttons or the [C1] [C2] knobs to switch categories.

Use the cursor buttons or the [C3] knob to select the parameter that
you want to edit, and use the [C4] knob to edit the value.

“Parameter List” (p. 61)

* If sample is selected as the WAVE GROUP TYPE, you can move the cursor to

Wave Number and press the [ENTER] button to edit the waveform.

Editing a Sample

(SAMPLE EDIT)

Here’s how to edit the user sample that’s loaded.

1 .

Use the cursor buttons to select

“SAMPLE EDIT,”

and then

press the

[ENTER] button

The SAMPLE EDIT screen appears.

Parameter

Value

Explanation

START

0–8388607

Specifies the position at which playback
starts.

LOOP

0–8388607

Specifies the loop position.

END

0–8388607

Specifies the position at which playback
ends.

ZOOM

x65536–x1

Zooms the waveform display in or out.

MODE

FWD, ONE-SHOT,
REV, REV-ONE

Specifies the playback method.

LEVEL

0–127

Adjusts the volume.

TUNE

-50.0 cent–50.0
cent

Finely adjusts the pitch.

gain

0db, +6db, +12db

Specifies the sample’s approximate volume.

Original Key

C-1–G9

Registers the sample’s pitch.

* The waveform specified as the instrument’s WMT1 is edited.
* If you want to edit the WMT2–3 waveform, move the cursor to WAVE NUMBER

in the INST EDIT screen, and press the [ENTER] button.

Summary of Contents for Groovebox MC-707


























































































































Search results

Summary of Contents for Groovebox MC-707

Reviews:

Related manuals for Groovebox MC-707

Brands by name

Popular brands

Roland Groovebox MC-707, Reference Manual

Search results

Summary of Contents for Groovebox MC-707

Reviews:

Related manuals for Groovebox MC-707

Brands by name

Popular brands