11
Basic Operation
Loading and Playing a Project
On the MC-707, data for one song is managed as a unit called a
“project .”
Projects are saved on an SD card. A project contains tracks, clips, tone
data, and data for the samples that are used.
1 .
Press the
[PROJECT] button
.
The PROJECT MENU screen appears.
2 .
Use the cursor buttons to select
“LOAD,”
and then press the
[ENTER] button
.
The PROJECT FILE LOAD screen appears.
3 .
Use the cursor buttons to select a project, and then press
the
[ENTER] button
.
A confirmation message appears.
4 .
Use the cursor buttons to select
“OK,”
and then press the
[ENTER] button
.
The project is loaded from the SD card.
If you decide to cancel, use the cursor [<] [>] buttons to select
“CANCEL,”
and then press the [ENTER] button.
* It might take some time for the project to be loaded.
* If the project has been edited, a confirmation message appears.
When loading is completed, you return to the home screen.
5 .
Press the
[START/STOP] button
.
The project plays.
Changing the Clips that Play
1 .
The HOME screen appears .
2 .
Use the cursor buttons to select the clip that you want to
play .
3 .
Press the
[ENTER] button
to reserve playback for the clip .
4 .
Press the
[START/STOP] button
to start playback .
Selecting a Tone or Drum Kit
1 .
Press the
[SEL] button
, and select a tone or drum kit track .
2 .
Press the
[SOUND] button
.
The Sound browser appears.
3 .
Use the cursor buttons to select
“PRESET,”
and then press
the
[ENTER] button
.
The PRESET browser appears.
4 .
Use the cursor buttons to select a sound .
In the PRESET browser when the PAD MODE [NOTE] button is lit,
you can use the pads to audition the sound.
5 .
Press the
[ENTER] button
to confirm the sound .
You return to the home screen.
