manualshive.com logo in svg

Roland Groovebox MC-707, Reference Manual

Share
Download
Roland Groovebox MC-707 Reference Manual Download Page 45

45

A drum track is a track that provides PCM synthesis and sample 

playback functionality.

Simple Sound Editing

1 . 

In the home screen, use the cursor buttons to select the 
drum track that you want to edit .

*  If the sound source is Clip, select the clip that you want to edit.

2 . 

Hold down the

 [SHIFT] button

 and press the

 [SOUND] 

button

 .

The KIT EDIT screen appears.

B 

C 

D 

E 

A 

3 . 

Use the cursor buttons to select an icon .

4 . 

Use the

 [C1]

–

[C4] knobs

 to edit .

You can also select an icon and press the [ENTER] button to edit.

MEMO

Press the [FUNC] button to access the second page.

A 

PAD

You can use the [C1]–[C4] knobs to perform simple editing for the 
selected pad.
Press the [ENTER] button to open the edit menu.

Parameter

Value

Explanation

LEVEL

0–127

Adjusts the volume.

COARSE

-24–+24

Adjusts the pitch in semitone units.

RELEASE

0–1023

Specifies the time over which the sound 
disappears after the key is released.
Larger values produce a longer decay, and 
shorter values produce a crisper sound.

REVERB

0–127

Specifies the amount sent to TOTAL FX 
REVERB.

FINE

-50cen–+50cen

Finely adjusts the pitch in one-cent units.

PAN

L64–63R

Specifies the pan of the sound.

ENV MODE

NO-SUS, SUSTAIN

Specifies the behavior when a pad is 
pressed.

NO-SUS:

 The volume immediately starts 

decaying when you press the pad.

SUSTAIN:

 The volume starts decaying 

when you release the pad.

DELAY

0–127

Specifies the amount sent to TOTAL FX 
DELAY.

With a pad selected, press the [ENTER] button to access the pad 
edit menu. Here you can exchange or edit sounds.
You can use the [C1]–[C4] knobs to perform simple editing of the 
sound.

B 

COMP (DRUM+COMP track only)

If you select 

“COMP”

 and then press the [ENTER] button, the 

compressor setting screen appears.
Six channels of compressors can be applied to one (and only one) 
of the drum tracks.
When you create the track, specify whether it will have these 
compressors.
If you use this track, the maximum number of Looper tracks is 
reduced from six to four.

C 

SET

When you select 

“SET”

 and press the [ENTER] button, the setting 

screen for the part parameters and drum kit appears.
You can use the [C1]–[C4] knobs to edit the reverb, delay, pan, and 
level for the total effect.

Parameter

Value

Explanation

LEVEL 

(MIX LEVEL) 

0-127

Specifies the volume of the clip.

PAN

L64–63R

Specifies the pan of the sound.

>REVERB 

(Reverb Send) 

0–127

Specifies the amount sent to TOTAL FX 
REVERB.

>DELAY 

(Delay Send) 

0–127

Specifies the amount sent to TOTAL FX 
DELAY.

D 

MFX

Here you can edit the effect settings.

Parameter

Value

Explanation

SWITCH

OFF, ON

Turns the effect on/off.

TYPE

Refer to the MFX/
IFX parameters.

Switches the effect type.

Effect parameters

The parameters shown depend on the 
selected effect type.

For details, refer to 

“Parameter List”

 (p. 61).

E 

NAME

Press the [ENTER] button to access the drum kit (KIT) name editing 
screen.

Operating the Unit

Explanation

Cursor [<] [>] buttons

Selects the character to edit.

[C2] knob

Switches between uppercase, lowercase, 
numerals, and symbols.

[C3] knob [C4] knob,
[VALUE] knob

Change the character.

Press the [C2] knob

Inserts a space.

Press the [C3] knob

Deletes a character.

Editing the DRUM Track

Summary of Contents for Groovebox MC-707


























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands