manualshive.com logo in svg

Roland Groovebox MC-707, Reference Manual

Share
Download
Roland Groovebox MC-707 Reference Manual Download Page 41

41

A tone track is a track that provides PCM/VA synthesis and sample 

playback functionality.
Use a tone track when you want to play pitched phrases.

Simple Sound Editing

1 . 

In the home screen, use the cursor buttons to select the 
tone track that you want to edit .

*  If the sound source is Clip, select the clip that you want to edit.

2 . 

Hold down the

 [SHIFT] button

 and press the

 [SOUND] 

button

 .

The TONE EDIT screen appears.

3 . 

Use the cursor buttons to select an icon, and use the

 [C1]

–

[C4] knobs

 to edit .

Press the [FUNC] button to access the second page of the editing 
items.

CTRL

Here you can make settings related to voicing.

Parameter

Value

Explanation

OCT

(Octave Shift) 

-3–+3

Specifies the pitch of the tone in octave 
units (maximum of ±3 octaves).

VOICE

(Mono/Poly) 

MONO, POLY

Specifies whether the tone plays 
polyphonically (POLY) or monophonically 
(MONO).

MONO:

 Only the note of the last-played 

key is played, one note at a time.

POLY:

 Multiple notes can be played 

simultaneously.

PORTAMENT

(Portamento Switch) 

OFF, ON

Specifies whether the portamento (*1) 
effect is applied (ON) or not applied (OFF).

P.TIME

(Portamento Time) 

0–127

Specifies the time over which the pitch 
changes when using portamento. Higher 
settings will cause the pitch change to the 
next note to take more time.

*1  Portamento is an effect that smoothly changes the pitch from 

one key to the next key that you press. Applying portamento 
when Mono/Poly is set to 

“MONO”

 will produce an effect 

reminiscent of the slide performance technique on a violin.

OSC 1–4

Here you can make settings for the oscillators of each partial.

Parameter

Value

Explanation

OSC 

(OSC Type) 

OFF, PCM, VA, PCM-
Sync, SuperSAW, 
Noise

Specifies the oscillator type.

PCM:

 Sound is produced by PCM. This 

sounds the wave specified by Wave Group 
and Wave Number L/R.

VA:

 Sound is produced by an analog-

modeled wave generated by calculation. 
This sounds the wave of the number 
specified by Waveform.

PCM-Sync:

 Sound is produced by the wave 

specified by the PCM-Sync Wave Number.

SuperSAW:

 Sound is produced by 

SuperSAW.

Noise:

 White noise is produced.

Parameter

Value

Explanation

GROUP TYPE 

(Wave Group Type) 

INT, SAMP

INT:

 When OSC TYPE is PCM, the internal 

waveforms of the MC-707 are used.

SAMP:

 When OSC TYPE is PCM, the 

waveforms loaded into the project are 
used.

BANK 

(Wave Bank) 

A, B, C

Specifies the bank (A–C) that is sounded 
when OSC Type is INT.

WAVE 

(Wave Number L/R) 

Specifies the wave number within the group specified by Wave 
Group.
Specifies the sample number when TYPE is SAMP.

*  In EASY MODE, the same waveform is specified for L and R.

FORM

SAW, SQR, TRI, SIN, 
RAMP, JUNO, TRI2, 
TRI3, SIN2

Specifies the wave that is sounded when 
OSC Type is VA.

SAW:

 Sawtooth wave

SQR:

 Square wave

TRI:

 Triangle wave

SIN:

 Sine wave

RAMP:

 Ramp wave

JUNO:

 Modulated sawtooth wave

TRI2:

 Triangle wave variation

TRI3:

 Triangle wave variation

SIN2:

 Sine wave variation

PW

0–127

This is an effect obtained by varying the 
pulse width duty cycle to modify the 
waveform.
It is available when OSCType is VA, and also 
allows you to create effects with other than 
SQR (square wave).

PWM

-63–+63

Specifies the amount (depth) of LFO 
applied to PW (pulse width).
LFO follows the settings of LFO2.

OSC (PCM-SYNC) 

Parameter

Value

Explanation

WAVE  

(PCM-Sync Wave No.)

Specifies the wave that sounds when OSC Type is PCM-Sync.
The PCM-Sync oscillator is effective when Structure is SYNC and 
set to Slave (the sync-modulated Partial 1, 3).

OSC (SuperSAW) 

Parameter

Value

Explanation

DETUNE  

(SuperSAW Detune)

0–127

Specifies the width of pitch variance 
between the seven sawtooth waves that 
are layered within one oscillator.
Higher values produce greater pitch 
variance. (When doing this, OSC Detune 
changes the pitch for each of the seven 
sawtooth waves by the same width.)

OSC (common to P2)

Parameter

Value

Explanation

SW

OFF, ON

Turns the partial on/off.

COARSE

-48–+48

Specifies the pitch in semitone units 
(maximum ±4 octaves).

FINE

-50cen–+50cen

Specifies the pitch in one-cent units 
(maximum ±50 cents).

VOL

0–127

Specifies the volume of the partial.

Editing the TONE Track

Summary of Contents for Groovebox MC-707


























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands