manualshive.com logo in svg

Roland Groovebox MC-707, Reference Manual

Share
Download
Roland Groovebox MC-707 Reference Manual Download Page 28

28

When the pads are in Note mode, you can use the step buttons and the 

pads to step-record phrases.
You’ll create a pattern by specifying the steps at which each pad will 

sound.

Tone Track

1 . 

Press the

 PAD MODE [NOTE] button

 .

The pads are in Note mode.

2 . 

Use the step buttons to select the step that you want to 
input .

That step is selected for editing, and the step button blinks.

*  The currently displayed measures are indicated by the MEASURE LEDs in the 

lower left.

You can use the MEASURE [<] [>] buttons to move between 
measures.

3 . 

Press pads (keys) to enter notes .

The pad that you input is lit.
If the EDIT screen is also displayed, the screen shows the notes that 
are input.

4 . 

Repeat steps 2–3 .

5 . 

Press the

 [EXIT] button

 when you’re finished editing .

You can also stop editing by pressing the currently-selected step 
button once again.

Quick Input

1 . 

Press the

 PAD MODE [NOTE] button

 .

The pads are in Note mode.

2 . 

Hold down the button of the step that you want to input, 
and press a pad (key) to input a note .

Inputting a Long Note 

(Inputting a Tie)

1 . 

Press the

 PAD MODE [NOTE] button

 .

The pads are in Note mode.

2 . 

Use the step buttons to select the step that you want to 
input .

That step is selected for editing, and the step button blinks.

3 . 

Hold down a pad (key) and press the 

pad [REST/TIE] button

 .

A tie is input for the specified pitch.

Changing the Measure Settings

1 . 

Hold down the

 [SHIFT] button

 and press the

 MEASURE [<] [>] 

button

 .

The MEASURE EDIT screen appears.

In the MEASURE EDIT screen, you can make settings for the clip’s 
notes.

Parameter

Value

Explanation

STEP LEN

1–128

Specifies the length of the clip.

SCALE

1/8, 1/16, 1/32, 
1/4T, 1/8T, 1/16T

Specifies the resolution of the clip.

1/8:

 eighth notes

1/16:

 sixteenth notes

1/32:

 thirty-second notes

1/4T:

 quarter note triplets

1/8T:

 eight note triplets

1/16T:

 sixteenth note triplets

MODE

FWD,
REV,
FWD+REV,
INV,
RND

Specifies how the clip will play back.

FWD:

 Play forward from the first step.

REV:

 Play in reverse from the last step.

FWD+REV:

 Play forward from the first step, 

then play backward from the last step.

INV:

 Play even-numbered and odd-

numbered notes inverted.

RND:

 Play randomly.

SHUFFLE

-50–+50

Specifies the amount of shuffle (bounce).

Duplicating a Measure 

(Duplicate)

1 . 

Hold down the

 [FUNC] button

 and press the

 MEASURE [>] 

button

 .

The current measure is duplicated.

Automatically Advancing the Step During 

Input 

(Step Input Mode)

Step input mode automatically advances to the next step each time 

you press and release a pad. This is a convenient way to quickly enter 

an arpeggio pattern.

1 . 

Hold down the

 [REC] button

 and press the step button .

You’re in step input mode.

2 . 

Press a pad (key) to input a note .

When you release the pad, the step advances.

*  By pressing the [REST/TIE] button you can advance the step without inputting 

a step.

Step-Recording a Phrase

Summary of Contents for Groovebox MC-707


























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands