Adjusting the Driver Settings
Follow the steps below to set the cutting parameters for the driver.
In Dr. Engrave, from the [File] menu, select [Print Setup].
The [Print Setup] dialog box appears.
Make sure the printer name is set to
[Roland EGX-20] (if the printer name
is not [Roland EGX-20], then click the
drop-down arrow and select [Roland
EGX-20]), then click [Properties].
The [Roland EGX-20 on LPT1: Properties]
dialog box appears.
Click the [Tool] tab.
The [Tool] page appears.
Change the values for items that need
to be adjusted, then click [OK].
To return to the [Print Setup] dialog box, click [OK].
Clicking
at the upper right of the dialog box changes the pointer to
, which you can then use to click an
item you want to learn about in detail. A detailed explanation appears.
26
3 Creating a Nameplate (Engraving Mode)
Summary of Contents for EGX-20
Page 51: ......
