manualshive.com logo in svg

Roland EGX-20, User Manual

The Roland EGX-20, an exceptional engraving machine, comes with a comprehensive User Manual that ensures you make the most of its advanced features. Easily downloadable for free from manualshive.com, this manual provides step-by-step instructions, enabling seamless operation and unlocking endless creative possibilities for your engraving projects.

Share
Download
background image

Choose the check boxes which you 

want to install, and then click the [In-

stall] button.

If you do not want to install a particular 

program, than clear the corresponding 

check box. Normally you should select all 

check boxes. 

The setup screen ([Welcome] dialog box) 

appears for the program whose check box 

you selected. 

If you selected the check boxes for all pro-

grams, then the setup screens appear in suc-

cession, starting with Virtual MODELA. 

Click [Next].

Follow the messages to carry out set-

up and finish setting up the program.

When installation finishes, a prompt 

dialog box appear. Click [OK]. 

When the installation of one program fin-

ishes, installation of the next one starts. 

In the interval until the next setup starts, a 

dialog box showing the progress of process-

ing is displayed.

Repeat steps 

 and 

 to install and set up each program.

When installation of 3D Engrave finishes

The [EGX-20 Driver Installation] dialog box appears. 
Choose the port for connecting the EGX-20. 
The EGX-20 connects to a printer port. If your computer has a single 
printer port, select [LPT1:]. 
Click [OK]. The EGX-20 driver is installed. 

When installation of the EGX-20 driver finishes

The [Settings: [EGX-20]] dialog box appears. 
Make sure the values are correct, then click [Close]. 

14

2  Installing and Setting Up the Software

Summary of Contents for EGX-20





















































Reviews:

No comments

Related manuals for EGX-20

Gerber Dimension 200 Manual preview
Dimension 200
Brand: Gerber Pages: 111

Brands by name

Popular brands

Load more brands